Scooter 24/20 | Aluminum | Push Scooter | Kick bike

Scooter 24/20 | Aluminum | Push Scooter | Kick bike

USA Amish made!
You have read about them on blogs, probably seen them on TV shows about the Amish, and if you have traveled the Amish communities in Pennsylvania you can’t help but notice these bright and shiny scooter bikes out and about. You may have even rented one to ride as these are very popular for rentals in tourist areas. Many of the photos shown are from our work with
Scooters are made in Pennsylvania by the Amish using high-quality materials. Read more below >


Purpose of the Kick Scooter

Amish scooter sizes approach that of a bike and because of the similarity, they are sometimes called  a "kick bike" or "foot bike." Riding one is similar to riding a bike, except that the rider stands on a low floorboard, rather than perched on a high seat, and propels it by kicking instead of pedaling.

Like standard bikes, Amish scooters are designed to carry a single rider at a  reasonable speed,  with or without a few goods in an attached wire basket.

Riders up to 250 pounds can enjoy gliding aboard this fun riding scooter comes with 85 PSI  24" front wheel and a 20" rear wheel.  
Speed – moderate or fast!
Our Amish kick scooters are not equipped with a speedometer, so it is up to each rider to determine his or her own "reasonable speed." In general, a moderate speed suggests that the rider:

  • Can firmly touch the ground with his or her kicking foot. The inability to firmly touch the ground indicates that the kick scooter is traveling faster than kicking speed. 

  • Use brakes wisely for speed control. A  front bicycle-style lever brake and a back "stomp" brake is standard equipment. Use devices to maintain riding speed. They should not, however, be considered as the means to execute an emergency stop as a last resort as the kick scooter may skid or flip.

  • Use brakes for short periods. The kick scooter's standard bike brakes, for example, help slow it down when traveling downhill. Extended application of the brakes, however, can cause surfaces to heat up excessively, cause wear, and when accidentally touched, cause skin burns. Walk the kick scooter down very steep, long, downhill routes.

  • Understands the difference between emergency situations on a kick scooter and a bicycle. In the event of an emergency, bike riders tend to get tangled in their equipment or are thrown over the handlebars. Kick scooter riders, however, can let go of their vehicle and step or jump off the almost ground level floorboard at the same time. 

Race with care!
Our kick scooters are designed to be ridden conventionally more than competitively. Racing, of course, requires that the rider thoroughly understands his or her vehicle and scrupulously checks all aspects of it before each ride.

Riding Surfaces and Stability
Like bicycles, our kick scooters can be ridden on sidewalks or roads over a number of surfaces. These include concrete, hard asphalt, packed block, and packed/groomed earth. Loose gravel and stone-filled roadways should be avoided. To retain stability, avoiding riding in the rain and/or through puddles. Do not ride over wet vegetation such as leaves (they are slippery and can hide objects such as large stones, glass, and branches), or over any surface that is oily slick and/or soft.

Conditions to Avoid
Our kick scooters are designed to hold a single rider, with no additional rider sharing the floorboard, or sitting on the handlebars. It is not built to be ridden off-road on un-groomed paths, used for stunts, such as being aloft or spinning, or be ridden recklessly without controlled speed. Night riding can be done, however, it requires that the rider wears proper reflective garments, plus has a head and tail light on the kick scooter. 
Optional battery operated headlight and taillights feature LED low energy use bulbs.  Cat Eye Head Light featuring 3 LEDs. The unit can easily be removed and used as a flashlight. Dual selection of steady on or flashing. Tail Light features 6 red  flashing LEDs.
The optional kickstand is also available.
Optional safety flag comes with an easy mounting bracket to attach to rear wheel lug. Features a bright orange pennant flag on a 59" tall fiberglass rod.
Use the drop down boxes at the bottom of the page to select options.

Scooters are shipped dimensional weight 

24”/ 20” Scooter Specifications;
Body material: Welded aluminum
Total body weight: 20 pounds.
Total body length with tires: 63-inches.
Total body height: 38-inches
Distance between the top of the floorboard and the ground: 2-3/4" T 1-3/4 ground
Floorboard: 5” x 13.5” foot clearance
Handlebars: Standard bicycle adjustable from 38”-40”
Recommended Rider Age: Adult
Maximum rider weight:* 250 lb recommended
Handbrake: Standard bike lever type controls the front brake.
Rear brake: Stomp (compression) type.
Wheels: Aluminum rims.
Wheel Attachment:  Standard bicycle nut and bolt (no wheel drop outs)
Bearings: Standard  bicycle open sided
Tires: 85 psi racing tires 
Inner tubes: Yes
Kickstand: Optional
Colors: Silver (only)
Wire bike basket: Standard
Lights: Optional head and taillight 
*  Recommended weight capacity is based on actual use by the Amish.  Always use good judgment when riding as regular riding rough terrain can cause more impact pressure.
Cleaning: Use a damp cloth to clean your kick scooter and avoid aggressive scrubbing or soaking. Avoid riding through salt, as it can dull surfaces. Touch up painted surfaces with a matching color available from your kick scooter dealer.

Brakes and Hand Lever: A caliper brake and related hand lever related to the front tire is standard equipment. Information on brake maintenance can be found in articles and videos on the web.  Information related to the following link covers this subject nicely. 

Back "stomp" Brake: Check the stomp brake lever to make sure it comes in contact with the tire when pressed with a foot and that the tire does not show rough wear from using it. 

Bearings: Open-sided bearings will require cleaning and lubrication just as a standard bike.

Tires: Make sure that tire air valves are clean before filling tires with air. Maintain air pressure to the PSI rating on the tire sidewall. Check treads and sidewalls for wear and cracking. Understand how to remove and replace your tires, and, as a convenience, always have extra inner tubes available. Many tutorials and videos related to tire maintenance are available on the web should you need more information.

Note that use of “racing wheels and tires” on a kick scooter does not mean or imply that these scooters are built for racing.  Racing wheels and tires are made to reduce the kick scooter's overall weight and traction, and thereby make cruising easier.

Seams and Welded Joints: Establish a regular schedule to examine seams and welded joints for wear and potential cracks. This is especially important for people who regularly ride on rough surfaces and/or who are near the scooters maximum weight. 

Accidents: After an accident, a thorough equipment examination is required. Check the frame to make sure it is not bent. Check that all the seams and welded joints are firm. Check brakes and the hand brake lever to make sure all are in proper position and work. 

Helmets: Although there is no law requiring that kick scooter riders wear one, we recommend that wear well-made biking helmets.



Shipping Estimator

Estimate Shipping Cost

Note: If the product has any options with * Required Field(s) in the drop-down box options above they must be selected to obtain a shipping estimate.

Note: Use the shipping estimator at checkout if other products are already in the shopping cart. This single product estimator will no longer provide a correct combined shipping estimate with other items.


Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register